Efficient electrochemical hydrogen evolution activity of nanostructured Ag3PO4/MoS2 heterogeneous composite catalyst.

Hydrogen (H2) generation by electrochemical water splitting is a key technique for sustainable energy applications. Two-dimensional (2D) transition-metal dichalcogenide (MoS2) and silver phosphate (Ag3PO4) possess excellent electrochemical hydrogen evolution reaction (HER) properties when they are combined together as a composite rather than individuals. Reports examining the HER activity by using Ag3PO4, especially, in combination with the 2D layered MoS2 are limited in literature. The weight fraction of MoS2 in Ag3PO4 is optimized for 1, 3, and 5 wt%. The Ag3PO4/1 wt % MoS2 combination exhibits enhanced HER activity with least overpotential of 235 mV among the other samples in the acidic medium. The synergistic effect of optimal nano-scale 2D layered MoS2 structure and Ag3PO4 is essential for creating higher electrochemical active surface area of 217 mF/cm2, and hence this leads to faster reaction kinetics in the HER. This work suggests the advantages of Ag3PO4/1 wt % MoS2 heterogeneous composite catalyst for electrochemical analysis and HER indicating lower resistivity and low Tafel slope value (179 mV/dec) among the prepared catalysts making it a promising candidate for its use in practical energy applications.

Investigation of In-Situ Carbon Coated LiFePO4 as a Superior Cathode Material for Lithium Ion Batteries.

In the present study, we have developed a simple and cost-effective approach for the synthesis of carbon coated LiFePO4 wherein different carbon precursors were used to find out the suitable precursor for carbon coating. Initially, the appropriate amount of Li, Fe, and P precursors and carbon source (glucose/sucrose/fructose) were dissolved in ethanol solution followed by hydrothermal treatment at 180 °C to obtain carbon coated LiFePO4. The structure and morphological analysis of In-Situ carbon coated LiFePO4 revealed the formation of thin and homogeneous carbon layer on crystalline single-phase LiFePO4 particles with fructose used as carbon precursor. Raman analysis confirms the presence of more ordered graphitic carbon and the ID/IG ratio is 1.01, 0.69 and 0.87 for C-LFP-S, C-LFP-F and C-LFP-G respectively, indicating that fructose assisted In-Situ carbon coating leads to the formation of more ordered carbon coating on LiFePO4 with high graphitization degree in comparison with carbon coating by glucose and sucrose. HR-TEM results revealed the presence of uniform carbon distribution, which encapsulates the crystalline LiFePO4 particles forming a core-shell structure in the presence of fructose as carbon precursor. C-LFP-S delivered a capacity of 125 mAh/g at 0.1 C rate but then due to non-uniform carbon layer distribution, the capacity faded out completely when tested at higher C-rates. Whereas C-LFP-F delivered a discharge capacity of 98 mAh/g at 0.1 C and 48 mAh/g at 1 C, which is promising compared to the LiFePO4 carbon coated using sucrose and glucose. It is concluded that LiFePO4 carbon coated using monosacrides as carbon precursors showed better electro-chemical performance in terms of capacity and cyclic stability when compared to LiFePO4 carbon coated using dissacrides, attributing that uniform, thin layer, and highly ordered graphitic carbon coverage on nano sized LiFePO4 particles greatly reduces the polarization resistance and hence improving the electrochemical performance of C-LFP-F.

Development of a novel carbon-coating strategy for producing core-shell structured carbon coated LiFePO4 for an improved Li-ion battery performance.

In the present study, LiFePO4 (LFP) has been synthesized using a flame spray pyrolysis unit followed by carbon coating on LFP using a novel strategy of dehydration assisted polymerization process (DAP) in order to improve its electronic conductivity. Characterization studies revealed the presence of a pure LFP structure and the formation of a thin, uniform and graphitic carbon layer with a thickness of 6-8 nm on the surface of the LFP. A carbon coated LFP with 3 wt% of carbon, using a DAP process, delivered a specific capacity of 167 mA h g-1 at a 0.1C rate, whereas LFP carbon coated by a carbothermal process (CLFP-C) delivered a capacity of 145 mA h g-1 at 0.1C. Further carbon coated LFP by the DAP exhibited a good rate capability and cyclic stability. The enhanced electrochemical performance of C-LFP by DAP is attributed to the presence of a uniform, thin and ordered graphitic carbon layer with a core-shell structure, which greatly increased the electronic conductivity of LFP and thereby showed an improved electro-chemical performance. Interestingly, the developed carbon coating process has been extended to synthesize a bulk quantity (0.5 kg) of carbon coated LFP under optimized experimental conditions as a part of up-scaling and the resulting material electro-chemical performance has been evaluated and compared with commercial electrode materials. Bulk C-LFP showed a capacity of 131 mA h g-1 and 87 mA h g-1 at a rate of 1C and at 10C, respectively, illustrating that the developed DAP process greatly improved the electrochemical performance of LFP in terms of rate capability and cyclic stability, not only during the lab scale synthesis but also during the large scale synthesis. Benchmark studies concluded that the electro-chemical performance of C-LFP by DAP is comparable with that of TODA LFP and better than that of UNTPL LFP. The DAP process developed in the present study can be extended to other electrode materials as well.